The Combine Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
1,912 Posts
Discussion Starter #1
Wondering if anybody is running chips on the 9660sts? Just want to make it equivalent to the 9760 for power.
 

·
Registered
Joined
·
1,912 Posts
Discussion Starter #5
Amax, which ones do you sell, have heard some cause problems and some don't.
 

·
Premium Member
Joined
·
385 Posts
Hi
The ones I installed on the bines was TSPerformance on the 9 litres,no problems.
On the tractors with the 9 litre I have installed tsperformance with a few exceptions were ok.
If there was a problem could use a unit from DSG Canada that would work with no codes .
The ones from DSG cost a little more.
Maxie
 

·
Registered
Joined
·
47 Posts
put a ts performance chip on 06 9660 this year, and when the dial was turned up over 2/3 it would cut the power in half, and smoke like and old 760 massey. kept it turned up just over half, maybe a little more power, but not enough to say it really a noticable difference.
 

·
Premium Member
Joined
·
385 Posts
Weell let me see.

The directions that comes with that box says after install to turn knob clockwise till it makes the engine run funny or thro a code then back it down.
So I guess you got that part right.
I have found that some machine can't handle the extra fuel and others work better with different boxes.

That is why I am a dealer for TS Performance,DSG and Steinbaur.

Maxie
 
1 - 10 of 10 Posts
Top