The Combine Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
407 Posts
Discussion Starter · #1 ·
16.5 will work in corn.....you may have to run it as slow as it will go(500 RPM) but it will work.
 

·
Registered
Joined
·
24 Posts
i bought a model f with a 4 row corn head last fall and 13 foot grain head i ran soybeans last fall but never used the corn head i got a 16.5 inch pulley with the corn head for the cylinder but no belt the owners manual says for a 20 inch pully for corn anyone know what belt fits the 16.5 pully or do i need to get a 20 inch pully?
 

·
Registered
Joined
·
407 Posts
Discussion Starter · #3 ·
I don't have a P/N..call your local Gleaner dealer and tell them you need a cylinder drive belt for an F2 with the 16.5 inch pulley.
 

·
Registered
Joined
·
361 Posts
F's had 3 pulley sizes 8" 13" 20" belts resptively were 71147547 1146000 and 71147546 for speeds of 907-1383 596-908 387-590 rps
F2s 78 and later had 10 13 16 and 20" 71147547 belt 803-1343 ; 71145999 633-1059; 71175575 for speeds of 499-834 aand 71151777 for 412-688 speed - 20" pulley.

16 (16.5") will bolt on but finding abelt for a F2 pulley on a F will take some doing.
 

·
Registered
Joined
·
361 Posts
belt lenghts 71147547- 77" 71145999 -82" 71146000-84" 71175575- 87" 71151777 -94"
71147546 -96.5" all lengths approx.
 
1 - 6 of 6 Posts
Top