[michaelshawn]

I'd like to know where the Header Height Sensor is on these machines, at the cutterbar or on the gauge wheels.

Thanks.

 

[placeholder]

It based off two things, the gauge wheels and the hydraulic pressure associated with them.

 

[michaelshawn]

Thanks Alex, I put my name in for a 30' today.

 

[davedan]

I saw a 40ft model, or atleast the tag said 40x on the head but noticed that deere has only the 35 out for this next year. The drum of the one I saw was quite different than the 09s

 

[rubberduck]

Does that center draper joiner-bar have one or two bolts on the ends? i cant tell from the photo.

 

[stevenwoll]

Does jd have a height sensing kit for their draper header? does it fit on older models or just new ones? am running 3 headsight kits on 939d .would not wanna cut without it.yes rubber it does have 2 bolts on either end.more pics of the 40x would be helpful too.

 

[placeholder]

The header I showed a picture of earlier in the flex draper thread... look close it has the same center drum & reel...

 

[Don Boles]

Are those Hart Carter reels?

Don

 

[davedan]

Seems like so much more headaches than my 04 936.

 

[glensts]

The old ones were and these look the same. I don't care much for them.