What do you think the settings should be set on for oats in this 9570 with 630F. We have the small wire concaves in it, with the General purpose sieves, but had alot of trouble getting the wheat clean, this is new for us, we are going for a Case 2377.. thanks!
Deere 9570 setting with 30' head in 0ats
1 - 3 of 3 Posts
Are the small wire concaves the best to be running in the oats? Also are people happy with the 70 series in corn? We had a 2377 with a 6 row head in corn and we could run 5.5mph and get a very clean sample, are we going to be able to do the same with the 9570 with 6 row?
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Joystick on 6R
John DeereAnyone else having issues with the grapple switch on the joystick for loader ? This is the second one in 2 years, the switch won’t make contact on the grapple control. Both times it’s been the open function that quits first. And of course you can’t buy just the switch anymore, you have to buy...- 2
- 83
-
Separator to cover for 9670
John DeereHi I'm new to this so bear with me. My 9670 separator cover is wor beside the return inlet. Just wondering if anyone has removed it and how. Does it come out the front or the back?- 4
- 205
-
Farmer Scotty · updated
-
9600 Electrics
John DeereI have an issue with the unload auger staying out and also some times the reel will go up but won’t come down again . You can turn the header off and on again. Then everything seems to work fine for a while . Anyone have any ideas ?- 6
- 307
-
640fd
John DeereHad the opportunity to demo a 735fd this fall and was very impressed. Was wondering about the older models of the 600fd. Any good or spend the big $?- 9
- 734
-
8820 combine
John DeereMy 8820 with 230 front has issue with ;when button to engage front is switched on ,the front doesnt respond at normal speed (only starts after a few seconds and then not very fast)- 5
- 267
-
Keith H · updated
Join now to ask and comment!