Joined
·
4 Posts
7010 with 207 engine hours. rod went through the block. any one else had problems
engine trouble
Join the discussion
Recommended Reading
-
6140 xflow cleaning
Case IHI need advice for a new combine (no hill only flat land).. actually have a 2388. Are the bushing in the midrange 140 serie combine with the new Xflow cleaning system really beefed up ? Is the Xflow cleaning system reliable or it's better to stay with the old fashionned cleaning system with...- 2
- 240
-
Canola settings 8230 flagship
Case IHG’day all after some settings for haversting windrowed canola. Crop yield is around 2.5T to the ha. With reasonable grain weight. Current settings are. Concaves large, small, slot, slot. Rotor speed 580. Fan speed 650, pre sieve 2, upper 10 lower 8. Can’t seem to get the capacity out of the...- 7
- 412
-
Sam Badger · updated
-
8240 issues
Case IHHad our 8240 for 5 seasons now and have had our fair share of issues with the thing. Wanted to get an idea from others if we're an outlier or if this is standard with Case combines? We ran CRs previously. 2200 engine 1600 rotor Overheating hydro issues first season Feeder house drive shaft bad...- 12
- 572
-
header height cont
Case IHwhat potentiometer part number is correct for a older 1020 header on a 2166. We were sent a 127360A2. Its not working. The prev owner said the combine was working with his header. Our header was working correct on a 1440, but we were told we needed a different potentiometer for the 2166. someone...- 3
- 225
-
Grain leaking
Case IHHas anyone with a 7240 got issues with grain leaking on top of gearbox underneath the shaker table? Looks like it is coming from the corners of the feederhouse where it is attached to the machine. The flap on the shaker table seems to be fine. I was going to put some foamtape in the corners of...- 3
- 420
Join now to ask and comment!