The Combine Forum banner
1 - 7 of 7 Posts

·
Premium Member
Joined
·
256 Posts
Discussion Starter · #1 ·
It is my understanding that the 2014 S680 has a totally enclosed Feed
Accelerator.

I'd like to hear from anyone who can give me the JD part number for
the complete, ready to install assembly, mine is shaking really bad.

Thanks

MS
 

·
Premium Member
Joined
·
256 Posts
Discussion Starter · #5 ·
Thanks farmerjones, I cleaned mine out today, hard work at my age of 78. It
was really badly out of balance, I can't tolerate the thumping.

On my 9770 I had both the discharge beater and feed accelerator replaced
with the totally enclosed ones from Mike Ellingson's Precision Farm Parts
in Sherwood ND, if I keep doing custom work the S680 will get them too.

MS
 

·
Registered
Joined
·
680 Posts
Thanks farmerjones, I cleaned mine out today, hard work at my age of 78. It
was really badly out of balance, I can't tolerate the thumping.

On my 9770 I had both the discharge beater and feed accelerator replaced
with the totally enclosed ones from Mike Ellingson's Precision Farm Parts
in Sherwood ND, if I keep doing custom work the S680 will get them too.

MS
Did u find it helped feed smoother ( less thumping) in tough conditions then the oem accelerator in your 9770? I have precision rasp bars and it thumps in tough lentils real bad not sure if it the rotor or feed accelerator?
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top