The Combine Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
50 Posts
If you're talking about the rubber rollers for the feederchain, 3" beet rollers work very nicely. I've run 'em on a 1680 for a couple thousand hours, and the originals are still fine. A couple 5/8" bolts with a piece of pipe for spacers, bolted through the side of the feederhouse seems to be strong enough.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top