The Combine Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,914 Posts
Discussion Starter · #1 ·
Hello again. I am wanting to do another modification on our 2388. The field tracker and header height switch are together but can't be operated at the same time in manual mode. I would like to add a foot controlled switch for the field tracker so when i cut wheat, fescue, corn, and sometimes beans in the auto mode, I can control the tilt with my foot while controlling the height with my finger. Where should I tap into the harness to make this work and with what wires? I want the auto mode to work fine, like I never added anything. I just want a foot controlled rocker switch for faster and better control. TIA
 

·
Registered
Joined
·
2,914 Posts
Discussion Starter · #3 ·
That could be a possibility. I have yet to find which work the best as I have not had any machine with this on yet. Does radar work or a mechanical arm the best. Do they keep up with 4-6 mph driving? I can look ahead and see most terrain changes. We combine over many terraces etc... We run two 1020 thirty foot heads
 
1 - 3 of 3 Posts
Top