The Combine Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
212 Posts
Discussion Starter #1
i am currenty and have been for the last 4 years running the small wire concave while cutting peas. should i remove all the filler plates while cutting the peas??? and one more ? what is a good order to put the plates in for cutting wheat/durum (30 bu) crop?
 

·
Registered
Joined
·
57 Posts
We also run our small wire concaves in our yellow peas, we do remove all concave wraps when harvesting peas and run them in the 1,2 and 5 positions in our small grains.
 

·
Registered
Joined
·
348 Posts
I have small wire concaves, but in the front concave I pulled every second wire, for doing yellow peas. I felt there was not enough space between wires for the peas. Then I run block off straps on the front one for doing cereals. Actually this year the Durum was thin with very little straw, so I ran six straps on the front two concaves.
 
1 - 3 of 3 Posts
Top