The Combine Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
129 Posts
Got a CR960 dont know how differant they'l be. Have the cylinder 5/16 running full speed. wind at 520 lower sieve at 1/8 and top at 9/16. manual had the settings in there but they were wacky. couldnt save settings as flax and didnt have flax in computer.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top