The Combine Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
I have a K2 that I ran this year and it got me through the season. I'm a young farmer just starting out so bear with me. When I was finishing up this past year the nut backed of the drive shaft/input shaft into the transmission and threw the drive belt. After getting the belt back on sheave when I let out on the clutch the shaft slows way down almost to a stop and the combine will not pull itself. Does this mean the clutch is busted? The tension idler on the drive belt is all the way out so I assume I am going to need a new belt as the old one appears to be stretched.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top