Heads on a JD 7720
1 - 4 of 4 Posts
Joined
·
2,118 Posts
Talk to Harv's Farm Supply and they probably either have an adapter or could make an adapter for the the heads you want mate up.
Joined
·
26 Posts
u probably already have an adapter in your shop its called a welder and a torch and an adjustable metric crescent wrench probably could make it work with a little work
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
9670 turbo actuator
John DeereHey I have a 9670 with a very sloppy turbo actuator linkage it's a simple little rod but jd seems to think it's worth 770 bucks for something I can hold in my hand . Does anyone know where i can get one alot cheaper? Any feed back is appreciated thanks.- 7
- 752
-
Farmer Scotty · updated
-
CTS suitability for harvesting grass seeds
John DeereHi, We harvested some tropical grass seed last year using a neighbours JD 9500 with a 925R front. The seed is an extremely light seed however we did put the fan on and came out with quite a good clean sample (realising we were blowing a fair bit out the back). This year we are looking at...- 0
- 26
-
steel filings in Differentials on John Deere 00, 20, 30 and newer series four drive tractors
John DeereI have a 2008 John Deere 9530 four wheel drive, During maintenance this spring I found almost a handful of steel filings in the front differential. It is a well cared for unit andwas wondering what caused the bearings to go. Was never low on oil and Never pulled a scraper. Tranny and back...- 14
- 972
-
Oat King · updated
-
8430t widening kit
John DeereI’m trying to track down a widening kit for an 8430t. I read a bunch of forums that said their used to be a company called Lean Technologies out of North Dakota that did it, but they’re closed now. Anyone have any ideas?- 0
- 75
-
2007 John Deere 9520
John DeereGday All Looking at a 3900h 2007 9520 just wondering what I should be looking for and are there any known issues with them it has the 18sp PS and Is AutoTrac Ready. Has 800 duals and full weight package. Panels are all tidy but faded and is fairly dirty but mechanically looks ok. Will be...- 6
- 426
-
LRNuske · updated
Join now to ask and comment!