The Combine Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
84 Posts
Discussion Starter · #1 ·
I started seeding yesterday and I'm wondering if anyone has ever had the issue I'm having. the front take has phosphate in it and when the fan isn't on all the tank pressure gauges read in the green when i close the lids and turn the fans on all the tank pressures read in the green again but when i turn the meters on for some reason the front tank pressure gauge goes to left about an inch out of the green toward the lid open side. any ideas by chance? when parked with the fans on i have raised the lid a bit without the meters turning and there is definitely pressure in the tank. I have the 430 bu double shoot cart and iv blown out the tank gauge lines and the lines feeding pressure to the tanks and iv blown out that little passage way where the pressure lines connect onto the meter area. I'm still getting product coming out just not sure if its at the right rate or even? any ideas would be appreciated. maybe its jus not a big deal and i should just giver.
 

· Registered
Joined
·
27 Posts
Meter box sensor extends into the air flow under the meter. If u pull ur meter u should see it sticking out a bit on far side, might be something wacky there.

Obviously you should check for lid leaks, I've seen it where we didn't find a leak until we rode along on cart with openers in ground...

Hope it helps
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top