The Combine Forum banner
1 - 2 of 2 Posts

49 Posts
Discussion Starter · #1 ·
last fall i upgraded with upper elbow gearbox and lower gearbox, from a 1600 or 2100 series conbine. was there any differences in between years of production of these gear boxes? mine works one turn on a sahft and one turn and a quarter on the other. my gearing is the following: 33 teeths on the drive from the big pulley and strap, 57 teeths on the big double sproket who drives the two bed augers, 33 on the smaller one , 49 teeths on the front bed auger, 43 teeths on the back bed auger.

when i unload, it seems to me that the grain tank emptying speed is ok, but the unload auger seems very slow, and very not much volume should i use a speed up kit or do i have simply a wrong setup

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.