The Combine Forum banner
1 - 1 of 1 Posts

· Registered
532 Posts
Probably the drop rated screw is too far in, or not allowing enough oil through due to such a slow speed of drop. Id start there, Linkage could be worn also where the levers go through the floor, check the clevis and pins where they hook up to the valves, the throw is adjustable, you might not be pushing or pulling the valve enough to open the passage for oil to return.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.