The Combine Forum banner
1 - 12 of 12 Posts

· Registered
Joined
·
181 Posts
Have one with just the steel cage with a door cut in side to use on loader as a cage for building sheds etc. Use one as a stand to put another one on so we can hook 1" 1/2 hose onto the gate valve to directly pour into granny pot. Also use a few for keeping our canola seed in once we have run it over our gravity table, easier to handle than bulka bags and weather proof. Have one on a set of axles that get towed around around behind four wheel motor bike by axle of our swing away auger to use for grain spraying at harvest time. i could keep going lol but have only used up one seasons worth of glyphosate shuttles, still have $#!t loads laying around.
 

· Registered
Joined
·
2,500 Posts
We are NH3 and granular for all of our air drill work, but I do use a bit of Alpine on the planter to carry the liquid inoculant for the soybeans. The shuttles work great for me because I only need a few of them per year. Just take X number of shuttles to my dealer and he fills them up. Also, we aren't set up to handle large amounts of liquid (tanks/trailers/etc), so I just place one on the trailer behind my pickup with the seed bags.

To me glyphosate is glyphosate and we've actually been getting better deals on name-brand glyph the last 2 or 3 years. Haven't taken delivery of any non-refundable IBC's in quite a while...

Andrew
 

· Registered
Joined
·
652 Posts
Handling bulka bags is easy with one of these beauties. Much safer, the loader arms are at the bottom of the bag gives so much stability and so much extra lift . Build one , buy one , get one they are good.

Grass Exercise equipment Vehicle
 

· Registered
Joined
·
2,283 Posts
Handling bulka bags is easy with one of these beauties. Much safer, the loader arms are at the bottom of the bag gives so much stability and so much extra lift . Build one , buy one , get one they are good.

View attachment 50850
Aussie Farmer is that the 600 series Global/Euro mounts? Care to share measurements for your spacing top and bottom? Have a pair of brackets that I'm using to reverse engineer a quick attach, but need to get spacing figured out first.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top