The Combine Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
400 Posts
your machine must have the 60 series moisture sensor, it is possible that just that sensor has been changed.
i carry a complete sensor with me in the service truck and just swap yhem out to keep the guy going.
 

· Registered
Joined
·
400 Posts
if it is a side mount, it is 50 series.

not necessarily, because when i swap them out, the first guy might have had 500 hours, then i fix his up for the next swap. the next guy might only have 300, now his will read 500.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top