Yes. Many times. It just keeps coming out to the same position once I run it, so I'm assuming this is the normal running position, but of all the machines I run, I've never seen one do this with new/ clean filters.
Also the engine seems to run tip top, and I checked for any other blockages in the intake system and found nothing.
I checked for blockages and didn't find anything, but I'll check again. Maybe I'll try another restriction gauge to see what happens. My main questions was if this was the normal running position or not but I guess I got my answer.
2188 doesnt take much to show filters full, Never changed the gauge... Our exhaust venture is worn badly which may be causing adverse reactions, which i doubt, its still going so cant be too much wrong 6400hrs
My 23 was doing the same thing and ended up being wet debris stuck on the venturies which dried and blocked off 70% of the air flow. Had to tear the entire air system apart to locate and was tough to get out of the tubes.
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.