The Combine Forum banner

JD 4940 with line purging

3987 Views 4 Replies 4 Participants Last post by  gavdalbs
Hi all,
Been reading up on the new R4045 and one thing I like is the air forcing the chem out of the line when cleaning. Has anyone fitted something similar to a 4940. It won't be as flash as the inbuilt of the 4045 but will still do the job. Or are there other ways less complicated to clean the boom out?
1 - 1 of 5 Posts
Wilger also makes a half turn flush valve on the end of the boom. Threads onto a 1" NPT. Run about $25 per valve. Pretty compact and just a bit cleaner than having a ball valve off the boom (fits tighter into the boom as well)
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.