The Combine Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
524 Posts
Discussion Starter #1
Had a couple codes come up on start up the other day. Switched it off and they didn't come back but today they stayed on. Engine starts but that's about it armrest and shift stick all inoperable. Cycled key on and off probably 2 dozen times and it eventually cleared. Local dealer not interested. The codes are-
Pti 2005.09
Icu 2005.09
Hcu 2005.09
Scu 2005.09
Sfa 2005.09
ECU 2005.09
ECU 1568.02

Many thanks. Middle of hay cutting
 

·
Registered
Joined
·
8 Posts
Check the harness from the floor to the armrest inside the loom there is a splice for the can-bus the green and yellow wire some time a wire broke of and the armrest controller doesnt communicate on the can-bus
 

·
Registered
Joined
·
524 Posts
Discussion Starter #4
I'm starting to think it is the Armrest controller. Do these go bad? Can't see any issues with wiring or components
 

·
Registered
Joined
·
132 Posts
Yes, just had to change our arm rest controller last year on our 7920 and 9430.. Happens often enough as our dealership had both of them in stock.
 

·
Registered
Joined
·
524 Posts
Discussion Starter #6
Few weeks ago now but for interest sake thought I'd share what happened.

The dealer had no idea so I took a punt and order the ACU controller and it fixed it. Had to get dealee to program it. Cheers for the replies
 
1 - 6 of 6 Posts
Top