I didnt see the sample in the tank but saw the peas from this field being dressed (cleaned) on Friday & it didnt look like a bad sample (were a few split ones + a few bleached ones but generally a good sample).
Yes Bushel, agriculture is a major thing here in Tasmania; mixed farming mostly. Main crops are Potatoes, Wheat, Poppies, Process (Green) Peas, Barley, Apples, Cherries, Onions & Ryegrass Seed.
that sounds like you have good roads but
not good farmers rights
You have such huge trucks but your restrictions
for ag machinery are almost the same like in germany
where you can go to 3m without car
around 3,2 with a car
and at 3,5 you need special papers
dont really get why you have such laws in such a wide
Yeah running a header behind a 1 ton is really differnt
I have seen trucks with ballers behind and other
things in canada.
Can anyone tell me if these vanes are used in the discharge beatter area . I am having trouble with a S670 throwing more material out the Right hand side and was wondering if these would help even the distribution of material out. Thanks
I have a 9860 STS runs but only just at 270RPM checked fuel coming out of tank and screen there and fuel filters they seem ok, any other suggestions? What fuel pressure should I be getting at the filter housing? Any help much appreciated.
We have 3 D635 and have always had lots of header height ground following issues. We have done lots of calibrations and changed sensors. Someitmes they work but for the most part we have to run manually. Any one have any solutions? We are thinking of trying headsight header height control.