The Combine Forum banner
1 - 9 of 9 Posts

· Premium Member
Joined
·
552 Posts
Out of the brochure,
(On CTS machines)Improved material handling, including new slope divider, two speed over-speed beater drive, fine cut chopper.
Oil cooler for feederhouse reverser gearcase.
Multi socket power strip in cab.
Rubber tracks fully available in '97
Greenstar ready
250 rpm increase on cleaning fan.
new 'fat' chaffer extention fingers to prevent grain leakage into the fan.
New clamp for easier removal of dual wheels.
Plus a couple items to do with corn fronts

Except for the first item, it looks like those improvements would be on all '97 9000 series machines
 

· Registered
Joined
·
4,003 Posts
Discussion Starter · #6 ·
Top man, Chompy!
Now, presumably most, if not all of those extras were carried over into the CTS 2?
 

· Premium Member
Joined
·
552 Posts
Now, presumably most, if not all of those extras were carried over into the CTS 2?
I can only guess so. Looking at a CTS2 brochure, it has the 1600 rpm fan. It also says 'greenstar equipped', but it looks like Y + M are standard, while the brown box is not.

I can't pick any of the other upgrades out, but you would imagine they'd be in there.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top