[factoryfarmer]

Re: **John Deere Rotors Repair/Maintenance Tips Th

Bracket that holds the tailing elevator will break right at the weld. Once it is welding it is usally fine. Plus the brackets on the right side that hold tension on the belts are also cheap. But once again if they are welded good you will not have a problem.

 

[factoryfarmer]

Re: **John Deere Rotors Repair/Maintenance Tips Th

Another big thing, ALWAYS unhook the ground wire going to the frame before you weld. If you don't you will f**k up the electronics.