The Combine Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3,507 Posts
Discussion Starter · #1 ·
Neighbor had a rebuilt starter on an L2. It turns over but will not stop spinning until the batteries are disconnected....
The key checks out... And thinking the rebuild got crossed wires.. Figured I would ask if anyone had this happen to them.
 

·
Registered
Joined
·
370 Posts
if the starter solenoid internal wires/ and or the external wires for the pull in and hold in windings are crossed, when the field circuit to the solenoid power is cut there is still power feeding through the contact disc terminals internally? i am not sure which style and model of starter, but make sure the little wires are in the right places, the previous info is in regard to the wire locations and functions
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top