The Combine Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
TX66 "LCD network error" & "other network error" anyone have any idea.
Have a couple of these units and learned that a mouse can be a big pain in the butt. Had the mouse thing figured out, just close all the air vents LOL. Anyway one got in to the dash and messed things up.
So I have replaced the fiber optics cable. as that is the first thing they go for. Took the monitor from the other combine and plugged it in but same message.
Looking for some hints Thanx!
 

·
Registered
Joined
·
92 Posts
The fibre optic cable has to join from the black connector to the white connector. One colour is a transmitter the other a receiver.
Originally the fibre pair had a line of faint white dots on one side a bit like radio speaker wire has the black stripe on one strand. If the dots are gone you can use a torch shining it down the fibre to determine which strand to hook up.
The fibre has to be a nice clean square cut on the end. Use a razor blade or super sharp knife.
 
1 - 2 of 2 Posts
Top