The Combine Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hey guys,

Got a Cat 470 with 16xx hours and just gave it a good washing, now when i start it up its giving me a bunch of issues

did i pooch a bunch of sensors? these ones come up

threshing cylinder sensor
grain elevator
feeder chain sensor
returns elevator sensor
fan sensor
ground speed sensor

was working just fine after i washed it and then i went back to move it and now all this is beeping at me.


anyone have any ideas? i looked over the fuses quickly they all seemed okay.
 

·
Registered
Joined
·
71 Posts
did you wash alot around the circut board that is by the door. We had these errors come up as well and when I checked with the dealership mechanic he told me to check all fuses and to unplug and plug in all fuses and relays...if that makes sense. I did that and it corrected these errors but had some others as well and with some investigation my circut board is shot and it is not cheap so I hope that yours is not as well. good luck
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top