The Combine Forum banner

1 - 4 of 4 Posts

·
Premium Member
Joined
·
276 Posts
Discussion Starter #1
Can you engage the separator with the hopper extensions down? I was calibrating the header endstops with the headsight system in the shop, but dont have enough clearance to unfold the hoppers.
 

·
Super Moderator
Joined
·
2,507 Posts
Can you engage the separator with the hopper extensions down? I was calibrating the header endstops with the headsight system in the shop, but dont have enough clearance to unfold the hoppers.
Yes, you’ll get an alert but just escape to cancel. Might only come on if you try to move come to think of it.
In fact you can fill it about 30% before full bin alert will trigger.
Simply lift extensions on the go to continue.
 

·
Premium Member
Joined
·
276 Posts
Discussion Starter #3
Thanks Don. I knew the grain tank auger was a gearbox, but just wanted to make sure. If I remember right there was an S series Deere around hear that did a lot of damage with the hopper down trying to cut under a overhead power line.
 

·
Super Moderator
Joined
·
2,507 Posts
You’re welcome.
I occasionally do desperation sample taking during light showers simply leaving the top down.
Done to study quality factors not including moisture, ha ha.
 
1 - 4 of 4 Posts
Top