The Combine Forum banner

loading crippled combine onto truck

3624 Views 12 Replies 7 Participants Last post by  madcow
Have a 7720 turbo combine with 224 front

Engine seized last harvest

Wanting to sell it as is

Wondering what thoughts people had onto how to load this onto a truck

The front is still attached to the combine unfortunately !

Would a crane be the best option ?
  • Like
Reactions: 1
1 - 2 of 13 Posts
And take the couplers off of the finals.

Can't see why you would need to do that.

Just put the gearbox in neutral. At least then the brakes will still work.
  • Like
Reactions: 1
How did the engine seize?

I see there is oil on the front elevator...........was it a blown oil filter drain hose? Or turbo oil hose?

A low oil pressure alarm would have saved a few 7720 engines over the years.
1 - 2 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.