The Combine Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
349 Posts
Discussion Starter · #1 ·
I am going to look at a used CR 9080 tomorrow, anything I should be looking for? I have only ever run CX and TX machines so I am not sure what to look for. Any problem areas to check? I also noticed reading through old threads that for every 10 issues with the CR combines there is 1 issue with the CX combines. Is that because there are 10 times more CR combines out there? Has me a little worried. Anyways any advice I can get would be appreciated.
 
1 - 2 of 2 Posts
Top