The Combine Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
247 Posts
Bought a 30' 974 for a 2388 combine this year. Previously coming from using 30' 1010 and 1020 headers. The draper is sure nicer than the auger for better feeding (especially in tough conditions), picking up downed crop.

The 2388 had 2 lift cyl's which did lift the header all the way up but was working to lift the last foot. I added the 3rd cyl for piece of mind. Also added fluid to rear tires and still have to watch when lifting the header when turning on headlands if coming down a hill. A 36' head would need 3rd cyl for sure and full weight kit on the rear.

Also had the factory 30.5 front tires which handled the header good. But added a dual kit on due to our wet harvest conditons this fall because was getting stuck easily.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top