The Combine Forum banner

Macdon tilt and reel moving at the same time?

3672 Views 9 Replies 4 Participants Last post by  seedcleaner
When I extend or retract my reel or header tilt, the other function begins to move once the selected function moves to its fullest. Are they all like this, because it really bothers me!!!

More detail:

2011 FD70 40' with Lexion package. Came with a HydraForce selector valve (the item that selects if you want to tilt or move reel). I just updated it to the newer style Bosch Rexroth as used on current headers and no change whatsoever. There has to be some internal leakage within this valve, buy why it acts just like the original valve has me puzzled. I unhooked the coils, (three on the Bosch) and operated it, and it still bypasses to the other function.

It makes me think all MacDon headers act like this but I can't believe that. It is frustrating when one function moves when operating the other.

Any insight completely appreciated.
1 - 1 of 10 Posts
Are you getting the right or any voltage to the solenoids?
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.