The Combine Forum banner

Making a header adapter work for a 8120

1453 Views 1 Reply 2 Participants Last post by  D.E55
Looking at a Honeybee SP36' header but it has an adapter for a JD 9760. Is it possible to make this work on a Case 8120? What would all need to be changed on the adapter to make it work.
1 - 1 of 2 Posts
What you need is called the shell. We bought a honeybee header with the wrong shell and were able to find a used one. Check on kijiji or try combine world for a used one. Some will come with the auger and drive, ours came stripped and we used our old auger and drive. I'm not sure what series of case ih combines will interchange, if it goes back to the 21 or 2300 series it shouldn't be to bad to find. Honeybee should know, their number is 306 296 2297.
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.