The Combine Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hello all, I recently purchased a Massey 750 with a straight 13' cut grain head. What are my header options for mechanically driven flex heads and corn heads? It is a red cab but newer model with hydrostatic drive with automatic height control and I believe hydraulic control for the reel height only. Thanks!
 

·
Registered
Joined
·
1,182 Posts
Your options are severely limited by the top drive system on the combine. Very difficult to put anything but the "OEM" heads on that combine. I've known a few people put JD heads on them, but it involved either gears and chains or long angled driveshafts. Sorry, IDK the Massey head numbers for you
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
thanks, I see a few heads at dealers, but all at least 6hrs away from me. I think the 9115, 9118 etc series will work, but I can tell as soon as I see them.
 

·
Registered
Joined
·
157 Posts
If you use a header that was on a 760/860 you may have to add filler plates at the feeder house opening. You will be able to take them off of your current header and move them if you need them.
 
1 - 9 of 9 Posts
Top