The Combine Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
I have a Condor G75 and the throttle joystick main boom on/off as well as section controls don't work. Apparently when hooked up to work like it should it blows fuses and has issues. Dealer said that this is normal for the machine and so they bypass the joystick and use the switchpro instead, I guess it has something to do with there being a 10 section boom and only 5 boom section switches on the joystick. Needless to say this makes things a little inconvenient, I was wondering if anyone has dealt with this or if there is a fix for the issue?
Thanks
 

· Registered
Joined
·
22 Posts
Discussion Starter · #4 ·
Does your master switch on joystick work? I would be fine with no control of sections just a master on/off control. right now when i make corner or need to shut off I have to use the On/Off toggle on the SwitchPro. Annoying to take hand off throttle then turn off...
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top