[Ralph]

New to us 9365 VRT tank, it’s an 8 run, was previously feeding 7 outlet secondary heads we have 9 outlet heads so according to the book we need the wider meter wheels , we dont use heavy rates , 50kg ha seed and up to 110kg ha fert,not sure what that is in inches, can we just calibrate it as is and the shaft spins a bit faster to make up the difference or get the wider meters? Cheers

 

[CRToney]

Not sure about the new carts but I just spin the rolls faster as opposed to putting wider ones in. Works for me on my 8370XL

 

[smythricky]

Only need to change them if you have heads with different number of outlets. No issue if they are all the same.

 

[Ralph]

I might add , the previous owner had a 72ft bar behind it on 15” spacing and we have a 60ft on 10” all heads 9 outlet so I can’t see why it won’t work