I brought a Cab Cam camera yesterday for my STS. Can any of you guys who have tham in your harvester tell me where you mounted the monitor in your cab? If you got any pics would be helpfull.
We put it upper left corner, just left of the AM/FM radio.
This made the most sense as you were already looking that direction when unloading anyway.
Deere had actually recommended the right side but in addition to being dumb
I think that's where they mount the GS2 now.
Speaking of dumb mounting spots.
Some modification was needed to move it to the left side, not sure exactly what, the dealer did it.
Sorry no pics, that was before my digital era.
We harvested some tropical grass seed last year using a neighbours JD 9500 with a 925R front. The seed is an extremely light seed however we did put the fan on and came out with quite a good clean sample (realising we were blowing a fair bit out the back).
This year we are looking at...
Hey I have a 9670 with a very sloppy turbo actuator linkage it's a simple little rod but jd seems to think it's worth 770 bucks for something I can hold in my hand . Does anyone know where i can get one alot cheaper? Any feed back is appreciated thanks.
I have a 2008 John Deere 9530 four wheel drive, During maintenance this spring I found almost a handful of steel filings in the front differential. It is a well cared for unit andwas wondering what caused the bearings to go. Was never low on oil and Never pulled a scraper. Tranny and back...
I’m trying to track down a widening kit for an 8430t. I read a bunch of forums that said their used to be a company called Lean Technologies out of North Dakota that did it, but they’re closed now. Anyone have any ideas?