This message has been moved to Technology by Tom Turner.
Moved: Anyone fitted a Trimble Ezy- guide 500 to a
Join the discussion
Recommended Reading
-
S-series Cost of operation (older machines)
John DeereFor those of you who have older S-680s or S 690s I have a few questions. I put 325+ separator hours a year on a 2014 S690 and am trying to figure out an average yearly repairs/maintenance that other people have with similar machines. I'm not including header maintenance, lease/ownership...- 43
- 2K
-
8850Champion · updated
-
greenstar brown box question
John DeereIm returning to the farm after 20 years and Im starting to update "within the last 20 years" some equipment. Anyway I purchased a 1996 John Deere 9500 on auction that has John Deere Greenstar yield monitor. Everything except the display or a gps. Im very new to precion ag but can anyone tell me...- 5
- 12K
-
9670 turbo actuator
John DeereHey I have a 9670 with a very sloppy turbo actuator linkage it's a simple little rod but jd seems to think it's worth 770 bucks for something I can hold in my hand . Does anyone know where i can get one alot cheaper? Any feed back is appreciated thanks.- 6
- 440
-
Farmer Scotty · updated
-
9rx
John DeereHi guys, I need to buy the tractor 9rx for seed sowing air drill N540 C. I need to know Fuel consumption per hour at full load. Hydraulic oil consumption Speed per hour how much area it can cover with the N540 C. Consumptions and Maintenance for the N540 C Also, what is the current...- 1
- 322
-
MNSI · updated
-
7720 TLS Pressure
John DeereI am going to replace the accumulators on the TLS on my 7720, both are weeping oil out the pressure caps and are no longer letting the suspension move. I am going after market at this stage, should be 60% of JD. RE306377 AU$930 So my question is what pressure should they be pre-charged...- 4
- 268
-
KWO · updated
Join now to ask and comment!