The Combine Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter #1
when downshifting while ripping in 5 th the tractor skips 4 th gear and goes directly into 3 gear is that normal?
 

·
Registered
Joined
·
295 Posts
Yes thats normal. Versatile does the same thing. It is to protect the transmission. The engine also derates. Real pita
 

·
Registered
Joined
·
13 Posts
Yes's this is normal under high draft loads, . Once the gears change down from 5th to 3rd you can change back up to 4th gear. It is a design feature that was built into the soft wear for all the mt800 A B C series
Under low draft loads this will not happen. Hope this helps best regards.
 
1 - 4 of 4 Posts
Top