The Combine Forum banner
1 - 1 of 1 Posts

· Registered
10 Posts
Discussion Starter · #1 ·
Last year during wheat harvest the one of the rubber paddles on the end of the rotor broke and threw itself into the chopper and bent the shaft. Now I have it reassembled and straightened at a machine shop. I can't stop the belt from jumping off the pulley towards the chopper side of the pulley. I am about to start pulling my hair out. one thing I will try tomorrow is maybe the pulleys are misaligned. that is the last thing I can think of. need some help
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.