The Combine Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
166 Posts
Discussion Starter · #1 ·
I'm having trouble removing the hydraulic suction screen from the tank. After draining the oil, I was able to get the jam nut for the elbow loose but cannot break the nut loose for the screen. Any of you guys have some tips?
John
 

·
Registered
Joined
·
166 Posts
Discussion Starter · #3 ·
Tried the pipe wrench and cheater, but the pipe wrench keeps wanting to twist, the nut is not very wide. The nut is probably over 2", don't think there is room for a socket and impact.
John
 

·
Registered
Joined
·
677 Posts
Couldn't get the screen out of the hydro reservoir on my R7 last summer either. Tried everything I could think of, I even had the reservoir out on the bench. I gave up after the tank started to bend from the force. Never did get it out. Just changed all the filters and flushed some fluid backwards through the screen. On a side note, anyone know the main filter part #?
 
1 - 5 of 5 Posts
Top