The Combine Forum banner
1 - 1 of 2 Posts

· Registered
597 Posts
I had my P3 rotor given to me my a shop that installed an enclosed rotor for a customer. Maybe someone on this site has one laying around... or go to a salvage yard. You will need to have a 1/2 " spacer machined for the RH end. Flip the LH bearing to the inside and you need an offset mount for the RPM pickup on the LH. Not a big job...
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.