The Combine Forum banner

Need a 1460 to spread straw 25-30 ft.

3K views 6 replies 7 participants last post by  krdexter 
On my 1460 The previous owner extended the hex shaft the beaters mount on and mounted a second set of spinners on the bottom of them. That way they are stacked on top of each other. He then made the diameter of the bottom spinners big enough so they don't hit each other and mounted some cupped paddles on them to catch and throw the residue out farther. He also took the shaker pan and raised it up so it dumps onto the bottom spinners to spread all the chaff as well. I don't know if it will give you the full 30' but it gets the full width of our 16'5 foot pretty easy at stock speed in some pretty heavy straw.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top