The Combine Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I would like to get dimensions for 9500 Need to ship and they need Length (without Head), width, Height and the weight. Thank you
 

·
Registered
Joined
·
590 Posts
From the brochure. No length listed.

Height 13' 5"
Width 12' 3"
Wheelbase 12' 4"
Weight Corn machine 22,200 lbs, grain machine 21,800 lbs
 

·
Registered
Joined
·
590 Posts
Probably closer to 12.
I am not close to our machine to measure. So these are estimates.
I would add at least 6 from font hub to front of feederhousing, and at least 4 from rear wheel hub to end of walkers ecnclosure. Chopper will add two feet from back panel.
 

·
Registered
Joined
·
590 Posts
I went over and looked at pictures on Tractorhouse.
I would estimate 5-6 feet on the front end, depending on whether the feeder is up or down.
Pretty close to 4 on the back, and you can unbolt the chopper and drop it flush with the back panel if that is an issue for transport or whatever.
So, you get it close to 9.
 

·
Registered
Joined
·
8 Posts
From the OM, the length from the front of the feederhouse to the end of the standard 14' unloading auger(which sticks out further than the back of the combine) is 25ft 11in or 7.91m.
 
1 - 7 of 7 Posts
Top