The Combine Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
70 Posts
Start out with 1/2" on the concave and about 600 rpms. You will have to shift the gearbox to the high side. You want to knock the beans out of the pods but leave the stems whole. If you get too tight you will grind up the stems and get a build up on the cage. You want to engage the cage sweep. This is presuming that you have a stock rotor with the reverse bars still in.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top