The Combine Forum banner
1 - 11 of 11 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi all, we have a new holland t9030 (same as an stx) that keeps stopping randomly. Seems to be an electric issue as its as if you turn the key off, the whole thing just shuts down, then starts as normal when you fire it back up. We are currently sowing and it is really annoying, and we are concerned that it is going to do it while we are driving down the road! We have checked all earths, and the auto electro toon has been all over and can't solve it, any ideas would be much appreciated, thanks
Mango
 

· Registered
Joined
·
530 Posts
T9 615 with same issue

All the controller offline alarms come in kills hydraulics, puts engine in idle and slams tractor in park. No codes come in. Yes, be very careful going down the road, thought we had fixed the issue and was heading to field and it did it at 10 mph. Anyone have any ideas please reply.
We have changed the control module in arm rest, made sure all grounds good, looked for wiring issues but still not resolved. Dealer mechanic been out 3 times.
 

· Registered
Joined
·
3,776 Posts
Man, this is getting scary! Do you mean the park brake engages and almost puts you through the windshield?

This drive by wire business is gonna start killing people...

Back in the day the machine was meant to be controllable so you could bring it to a safe stop.
 

· Registered
Joined
·
299 Posts
I had a similar problem with a NH T8040, engine would go back to idle, lose hydraulics & gear change but foot throttle still worked
very frustrating but ended up being the wiring harness to the armrest controller, the updated version ( which no one told the dealers about ) was a longer harness so it was less prone to fatigue
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top