The Combine Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,161 Posts
Discussion Starter · #1 ·
On a Pro600 is the total bushels for the task/field tied to the bushel yeild per acre and bushel average? Acre meter is a bit out but the bushels seem to match what is going into the bins. The yield per acre seems unbelievable at times. Wondering if that adds the bushels to the total bushel count or if it is counting bushels from what is actually entering the hopper.
 

·
Registered
Joined
·
1,644 Posts
The pro 600 counts weight, tests moisture and tracks distance, these all factor in together to give yield and bushels. If anything is out like area, can go back into calibrations and area and select field, task, etc and enter actual area and it will auto adjust itself. One should do the distance calibration first, then moisture, then yield last for it to be accurate.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top