The Combine Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
561 Posts
Does you machine have the roller in front of the chopper? If so make sure the belt is crossed so it turns backwards to the rest of the combine. Its job is to feed the chopper in case the straw doesent quite make it from the beater.
 

·
Registered
Joined
·
561 Posts
Filler plates are sheet metal bolted on top of the beater grate to smoothe the crop flow and e;iminate crop from falling through onto the sieves. All small grain machines should have them installed to work properly.
 
1 - 2 of 2 Posts
Top