The Combine Forum banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
7 Posts
Discussion Starter · #1 ·
replacing the fuel line on my combine and I can not get the fuel line that goes from the lower fuel filter to the injector pump.......the way it routed up there is impossible to get it out! Let alone getting to new one routed back!

Just wondering if anyone else has done this, and was willing to share any tips......I'm pretty much ready to give up on it, and let the dealer work on this project!
2008 8010
Feeling defeated.........
 

·
Registered
Joined
·
145 Posts
I changed one last fall piece of cake! took the air hose and blew the tube that it runs in out and the tied a string to the old one on the bottom and pulled it up, when the string came out on top I tied the new one to the string on the ground and pulled it up!
 

·
Registered
Joined
·
83 Posts
Yup we used an electrical fish tape. Taped it to the old line pulled it out and sent the new one down with it. There is a p-clip behind the tank it runs through and can be difficult in that spot but twisting and persuveriance you will make it.
 
1 - 3 of 3 Posts
Top