The Combine Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
401 Posts
Discussion Starter · #1 ·
I have never run a draper, but have been told they are well worth the extra money and I need one. Since I haven't been around them I am ignorant as to the questions I would need to ask if I was looking at a used one, what I would need to look at on a used model, how to tell if it is a flex or rigid, and anything else you guys can think of that a person that doesn't know anything about them would need to know. Thanks in advance for the help.
 

·
Registered
Joined
·
401 Posts
Discussion Starter · #3 ·
Thanks for the help kb. I run a 2008 8010 and I currently am running a 30ft 2020. I need a flex head as I do mostly soybeans on rolling ground. From what I understand the JD and Case drapers are MacDon's right. Also from the little research I have done it sounds like as you said MacDon has the best draper. Thanks again.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top