Rasp bars
Join the discussion
Recommended Reading
-
Looking to purchase a Case 500HD
Case IHLooking at a 2013 Case 500, triples and single 57gpm pump. Any tips / watch outs for that tractor ? We have a stx 450 and it’s been good (qsx15 powered) pulling 62 shanks with paired row openers on our drill. Could we pull 70 shanks with the 500 (Iveco 12.9L powered)? Tractor has one nose weight...- 5
- 319
-
Low coolant temperature reading 8230
Case IHOur 8230, Iveco engine tier 2 started showng low coolant temperature 47c we are sure the engine is at correct operating temp. Coolant level spot on. Any experience about ? Is it crook sensor or wiring issue- 0
- 66
-
1010 Reel sag
Case IHAnyone ever had problems with a 1010 reel on a 16 series case header (1644 in this instance)? Left hand side of the reel will drop but the right will not, left hand side is a slave cylinder with oil supplied by the right hand ram, new seals have been put in both rams but still only the left hand...- 9
- 156
-
CASE-IH 1660- Concave adjustment ratchet lever-anything better??
Case IHAnyone found anything better then the factory ratchet lever for the concave adjustment? Mine has always been very hard to flip the direction lever on, works better for a little while if you blow it out and lube it up good, but it never works decent for very long. A new one is $143.00, which I...- 2
- 207
-
6140 xflow cleaning
Case IHI need advice for a new combine (no hill only flat land).. actually have a 2388. Are the bushing in the midrange 140 serie combine with the new Xflow cleaning system really beefed up ? Is the Xflow cleaning system reliable or it's better to stay with the old fashionned cleaning system with...- 2
- 359
Join now to ask and comment!